Dahua NVR41 series User Manual

User's Manual
94
account.
● If the password reset function is enabled, you can use mobile phone to scan the QR code
to reset the password. For details, see "4.1.3.2 Resetting Password on Local Interface".
● If the password reset function is disabled, there are two situations:
◇
If you configured security questions, you can reset the password by the security
questions.
◇
If you did not configure the security questions, you can only use the reset button on the
mainboard to restore the Device to factory default.
Reset button is for some series product only.
4.1.3.1 Enabling Password Reset Function
After enabling password reset function, you can scan QR code on the local menu to reset
password.
Step 1 Select
Main Menu
>
Account
>
Password Reset
.
The
Password Reset
interface is displayed. See Figure 4-5.
Figure 4-5
Step 2 Check the box to enable reset function.
This function is enabled by default.
Step 3 Click
Apply
to set settings.
If the password reset function is disabled, you can follow the ways listed below to
reset password.
● Device supports Reset button on the main board: You can answer the security
question on the local menu or click the Reset button on the main board to reset
password. Refer to "4.1.3.3 Reset Button" for detailed information.

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English