User's Manual
305
reference.
Step 7 When the system completes backup, you can see a dialogue box prompting
successful backup.
Step 8 Click
Backup
, system begins burning. At the same time, the
Backup
becomes
Stop
.
You can view the remaining time and process bar at the left bottom.
● During backup process, you can click
ESC
to exit current interface for other
operation (For some series product only). The system will not terminate backup
process. (This function is for some series products only.)
● System pops up corresponding dialogue box if there is no backup device, or no
backup file, or error occurs during backup process.
● The file name format usually is: Channel number+Record type+Time. In the file
name, the YDM format is Y+M+D+H+M+S. File extension name is .dav.
● Click
One-Click Backup
to back up all required files.
4.12 Network
You can set NVR network parameters so that the NVR can communicate with devices in the
same LAN.
4.12.1 TCP/IP
Select
Main Menu
>
NETWORK
>
TCP/IP
, the
TCP/IP
interface is displayed. See Figure
4-207.
To Next Page
Loading...
Need help?
General
