Dahua NVR41 series User Manual

User's Manual
250
interface. Click
OK
to save.
◇
There are six periods for you to set for each day.
◇
Under
Copy
, select
All
to apply the settings to all the days of a week, or
select specific day(s) that you want to apply the settings to.
2. Click
Apply
to save the settings.
Step 5 Click
Apply
button to complete setup.
4.7.2.9 ANPR
System uses the video recognition technology to extract the plate number on the surveillance
video and then compare it with the specified plate information. System can trigger an alarm
once there is a matched result.
You can set different plate recognition rule, alarm linkage actions in different environments
(blacklist, whitelist and regular).
Step 1 Select
Main Menu
>
AI
>
Parameters
>
ANPR
.
The
ANPR
interface is displayed. See Figure 4-157.
Figure 4-157
Step 2 Select the
Enable
check box to enable ANPR.
Step 3 Click
General
(default),
Blacklist
or
Whitelist
tab to configure it.
Before activate blacklist alarm or whitelist alarm, you need to add the corresponding
plate information. Refer to "4.7.3.2 Black/whitelist" for detailed information.
● Regular: Device triggers an alarm when it detects any plate number.
● Blacklist: Device triggers an alarm when it detects plate number in the blacklist.
● Whitelist: Device triggers an alarm when it detects plate number in the whitelist.
Step 4 Set parameters. See Table 4-52.

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English