Dahua NVR41 series User Manual

User's Manual
155
SN
Icon
Description
5
When the device connects to the network camera remotely, system
displays this icon.
This function is for some series products only.
4.3.2 Navigation bar
You can quickly perform operation through the icon on the navigation bar.
● Different series products may display different navigation bar icons. Refer to the actual
product for detailed information.
● Select
Main Menu
>
SYSTEM
>
General
>
Basic
to enable navigation bar function and
then click
Apply
; otherwise you cannot see the following interface.
Click the live view interface. You can see navigation bar. See Figure 4-63. Refer to Table 4-21
to view detailed information.
Figure 4-63
Table 4-21
Icon
Function
Open
Main Menu
.
Expand or condense the navigation bar.
Select view layout.
Go to the previous screen.
Go to the next screen.
Enable tour function. The icon switches to .
Close the tour or the triggered tour operation has canceled,
device restores the previous preview video.
Open the PTZ control panel. For details, see "4.4.2 PTZ
Control".
Open the
Color Setting
interface. For details, see "4.4.2 PTZ
Control".
This function is supported only in single-channel layout.
Open the record search interface. For detail, see "4.6.2
Search Interface".
Open the
Voice Broadcast
interface. For detail, see"4.18.3
Broadcast".

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English