User's Manual
309
4.12.3 External Wi-Fi
The device can be connected via wireless network with an external Wi-Fi module, and it can
reduce the difficulty of device connection without a network cable.
Prerequisites
Make sure that external Wi-Fi module is installed on the device.
This function is supported on select models.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
Wi-Fi
.
Figure 4-209
Step 2 Select a site and click
Connect
.
Table 4-66
After it is enabled, the NVR will connect to the nearest site that was
previously successfully connected after boot-up.
Disconnect the current connection.