User's Manual
13
In normal playback or pause mode, click this
button to reverse playback.
In reverse playback, click this button to pause
playback.
In text mode, input number 6 (English character
M/N/O).
In playback mode, playback the next video.
In menu setup, go to down ward of the drop-down
list.
In text mode, input number 9 (English character
W/X/Y/Z).
In normal playback click this button to pause
playback.
In pause mode, click this button to resume
playback.
In text mode, input number 5(English character
J/K/L).
To connect USB storage device, USB mouse.
Network
abnormal
indicator light
Network error occurs or there is no network
connection, the light becomes red to alert you.
HDD abnormal
indicator light
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
System is recording or not. It becomes on when
system is recording.
It is to receive the signal from the remote control.
2.1.10 NVR48/48-16P Series
The front panel is shown as follows. See Figure 2-12.
Figure 2-12
Table 2-10
Power button, press this button for three seconds
to boot up or shut down NVR.
Input Arabic number.
Switch channel.