User's Manual
111
Enable the DHCP function. The IP address, subnet mask
and default gateway are not available for configuration once
DHCP is enabled.
● If DHCP is effective, the obtained information will
display in the
IP Address
box,
Subnet Mask
box and
Default Gateway
box. If not, all values show 0.0.0.0.
● If you want manually configure the IP information,
disable the DHCP function first.
● If PPPoE connection is successful, the IP address,
subnet mask, default gateway, and DHCP are not
available for configuration.
System can process the downloaded data first if you enable
this function. The download speed is 1.5X or 2.0X of the
normal speed.
● For IPv6 version, the IP address, default gateway,
preferred DNS; alternate DNS is 128-digit. Fill in all
items here.
● This function is for some series product only.
4.1.4.3 P2P
Scan the QR code on the actual interface to download the cell phone app. Register an account
and then you can use the smart phone to add the device.
Before using the P2P function, make sure that the NVR has connected to the WAN.
4.1.4.3.1 Local Operation
Step 1 Click
Next
button.
The
P2P
interface is displayed. See Figure 4-22.
To Next Page
Loading...
Need help?
General
