User's Manual
324
Authentication
Password/Encrypti
on Password
Enter the password for authentication type and encryption type. The
password should be no less than eight characters.
In the
Encryption Type
list, select an encryption type. The default
setting is CBC-DES.
Step 3 Compile the two MIB files by MIB Builder.
Step 4 Run MG-SOFT MIB Browser to load in the module from compilation.
Step 5 On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, and
then select the version number to query.
Step 6 On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
4.12.12 Multicast
When you access the Device from the network to view the video, if the access is exceeded,
the video will not display. You can use the multicast function to group the IP to solve the
problem.
Step 1 Select
Main Menu
>
NETWORK
>
Multicast
.
The
MULTICAST
interface is displayed. See Figure 4-222.
Figure 4-222
Step 2 Configure the settings for the multicast parameters. See Table 4-74.
Table 4-74
Enable the multicast function.
To Next Page
Loading...
Need help?
General
