User's Manual
104
Enable the navigation bar. When you click on the live view
screen, the navigation bar is displayed.
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the speed is.
Step 3 Click
Next
button to save settings.
4.1.4.1.2 Date and Time
You can set device time. You can enable NTP (Network Time Protocol) function so that the
device can sync time with the NTP server.
You can also configure date and time settings by selecting
Main Menu
>
SYSTEM
>
General
>
Date&Time
.
Step 1 Click
Date&Time
tab. See Figure 4-17.
Figure 4-17
Step 2 Configure the settings for date and time parameters. See Table 4-4.
To Next Page
Loading...
Need help?
General
