Dahua NVR41 series User Manual

User's Manual
156
Icon
Function
Open the
Alarm Status
interface to view the device alarm
status. For details, see "4.8.2 Alarm Status".
Open the
Channel Info
interface to display the information of
each channel. For details, see "4.3.2.1 Channel Info".
Open the
Add Camera
interface. For details, see "4.1.4.4
Adding Camera".
Open the
NETWORK
interface. For details, see "4.10.3
Network".
Open the
Disk Manager
interface. For details, see "4.13.3
Disk Manager".
Open the
USB Management
interface. For details about USB
operations, see "4.3.2.2 USB Management".
4.3.2.1 Channel Info
After the remote device registered to the corresponding channel, you can view its status such
as alarm status, record status, connection status, record mode, etc.
● Alarm status: It includes motion detection alarm, video loss alarm, tampering alarm.
● Record status: System is recording or not.
● Bit Rate: System displays bit rate information.
● Status: current channel connection status.
Click , system goes to the channel information setup interface. You can view information of
the corresponding channel. See Figure 4-64.

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English