User's Manual
154
Figure 4-62
4.3 Live View
After you logged in, the system goes to multiple-channel live view mode by default. You can
view the monitor video of each channel.
The displayed window amount may vary. The actual product shall prevail.
4.3.1 Preview
On the live view interface, you can view the monitor video of each channel. The corresponding
channel displays date, time, and channel name after you overlay the corresponding
information. Refer to the following table for detailed information. See Table 4-20.
Table 4-20
When current channel is recording, system displays this icon.
When motion detection alarm occurs, system displays this icon.
When video loss alarm occurs, system displays this icon.
When current channel is in monitor lock status, system displays this
icon.
To Next Page
Loading...
Need help?
General
