User's Manual
256
4.7.3.1.1 Adding Face Pictures
You can add face pictures to the existing libraries one by one or by batch, or add from the
detected faces.
To add face pictures one by one or by batch, you need to get the pictures from the USB
storage device. The picture size should be smaller than 256K with resolution between
200×200–6000×5000.
4.7.3.1.2 Adding One Face Picture
You can add one face picture to the database. It is for the scenario that the registered human
face picture amount is small.
Step 1 Select
Main Menu
>
AI
>
Database
>
Face Database Config
The
Face Database Config
interface is displayed.
Step 2 Click of the library that you want to configure.
The
Details
interface is displayed. See Figure 4-161.
Figure 4-161
Step 3 Click
Register
.
The
Register
interface is displayed. See Figure 4-162.