User's Manual
147
Before you control the PTZ, make sure the PTZ decoder and the NVR network connection is OK.
5.6.7.1 PTZ Settings
Background Information
You can set different PTZ parameters for local type and remote type. Before you use local PTZ, make
sure you have set PTZ protocol; otherwise you cannot control the local PTZ.
●
Local: The PTZ device connects to the NVR through the cable.
●
Remote: The PTZ device connects to the NVR through the network.
This function is available on select models.
Procedure
Step 1 Select
Main menu
>
Camera
>
PTZ
.
Figure 5-38 PTZ (local)
To Next Page
Loading...
Need help?
General
