User's Manual
334
Parameter Description
Connect
Select an available site and then click
Connect
.
Step 3 Click
Apply.
●
After the connection is successful, a Wi-Fi connection signal flag appears in the upper-
right corner of the live view page.
●
The Wi-Fi module models currently supported are D-LINK, dongle and EW-7811UTC
wireless cards.
5.11.5 Wi-Fi AP
Background Information
You can configure Wi-Fi parameters for the NVR to ensure that a wireless IPC can connect to the NVR
through Wi-Fi AP.
This function requires the built-in Wi-Fi module in the Device.
5.11.5.1 General Settings
Background Information
You can configure SSID, encryption type, password and channel of the device.
●
This function is supported on select wireless models.
●
When the wireless IPC and NVR are matched, the pairing will be completed in 120 seconds after
they are powered on.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
Wi-Fi AP
>
General
.
To Next Page
Loading...
Need help?
General
