User's Manual
297
Parameter Description
Buzzer The system activates the buzzer when an alarm occurs.
Log When an alarm occurs, the system records the event in the logs.
Alarm Tone
When an alarm occurs, the system plays the selected audio file.
Make sure that the audio files have been uploaded to the system. For
details, see "5.18.1 File Management".
Step 8 Click
Apply
.
5.9.14.3 AI Search (SMD)
You can search for and play back videos that triggered SMD alarms.
Procedure
Step 1 Select
Main Menu
>
AI
>
AI Search
>
SMD
.
Step 2 Select channel, type, start time and end time, and then click
Search
.
●
Click to play back the video.
●
Select a video and click
Export
to export video file to a USB flash drive.
5.9.15 Vehicle Density
You can configure the rules for traffic congestion and parking upper limit, , and view the counting
data on the live page.
●
Traffic congestion: The system counts the vehicles in the detection area. When the counted
vehicle number and the continuous congestion time exceed the configured values, an alarm is
triggered and the system performs an alarm linkage.
●
Parking upper limit: The system counts the vehicles in the detection area. When the counted
vehicle number exceeds the configured value, an alarm triggered and the system performs an
alarm linkage.
5.9.15.1 Enabling Smart Plan
To use AI by camera, you need to enable the smart plan first. For details, see "5.9.3 Smart Plan".
5.9.15.2 Configuring Vehicle Density
Procedure
Step 1 Select
Main Menu
>
AI
>
Parameters
>
Vehicle Density
.
To Next Page
Loading...
Need help?
General
