User's Manual
288
Figure 5-179 Queuing
Step 2 Select a channel, and then click
Add
.
Step 3 Select the
Enable
checkbox.
Step 4 Click to draw queuing rule and area.
Step 5 Click under
Parameters
, and then enable
Queue People No. Alarm
or
Queue Time
Alarm
.
Step 6 Click under
Trigger
to configure alarm schedule and linkage. For details on alarm
linkage, see Table 5-50.
Step 7 Click
Apply
.
5.9.12.5 Configuring Abnormal Detection
After configuring queuing alarm, the system can realize the corresponding linkage actions once the
number of people in the queue or the waiting time has triggered an alarm.
Procedure
Step 1 Select
Main Menu
>
AI
>
Parameters
>
People Counting
>
Abnormal Detection
.
To Next Page
Loading...
Need help?
General
