User's Manual
361
Figure 5-246 Local hotspare
Figure 5-247 Global hotspare
Step 3 You can select
Local Hotspare
or
Global Hotspare
.
●
Local Hotspare
: Select the target disk, and the current disk will serve as the hot spare
disk for the selected target disk.
●
Global Hotspare
: The current disk will serve as the hot spare disk of the entire RAID.
Step 4 Click
OK
.
Click to delete a hot spare disk.
5.12.4 Disk Group
By default, the installed HDD and created RAID are in Disk Group 1. You can set HDD group, and HDD
group setup for main stream, sub stream and snapshot operation.
Procedure
Step 1 Select
Main Menu
>
STORAGE
>
Disk Group
.
To Next Page
Loading...
Need help?
General
