Dahua NVR5432-XI User Manual

User's Manual
230
You can create only one passerby database.
Figure 5-120 Add database
Step 3 Select
Passerby Database
from the
Type
list, and then configure other parameters.
Table 5-31 Passerby database parameters
Parameter Description
Name Enter a name for the passerby database.
Number of Images
Configure the number of images that the database can
contain.
Storage Full
Select the storage strategy when space is full.
●
Stop: No more images can be added.
●
Overwrite: The newest images overwrite the oldest
images. Back up the old images as necessary.
Time
Set the period in which the system removes duplicate face
images from the database.
Step 4 Click
OK
.
5.9.6.3 Adding Images to Face Database
You can add face images to the existing databases one by one or in batches.
5.9.6.3.1 Adding Face Images One by One
You can add one face image to the database. It is for the scenario that the registered human face
picture amount is small.
Procedure
Step 1 Select
Main Menu
>
AI
>
Database
>
Face Database Config
.
Step 2 Click of the database that you want to configure.

Dahua NVR5432-XI Specifications

General

Brand	Dahua
Model	NVR5432-XI
Category	Network Hardware
Language	English