Dahua NVR5432-XI User Manual

User's Manual
154
5.6.7.4.3 Patterns
Procedure
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the pattern.
Step 2 Click to call the pattern.
The PTZ camera moves according to the configured pattern repeatedly.
Step 3 Click again to stop calling the pattern.
5.6.7.4.4 AutoScan
Procedure
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the border.
Step 2 Click .
The PTZ camera performs scanning according to the configured borders.
Step 3 Click again to stop auto scanning.
5.6.7.4.5 Calling AutoPan
Procedure
Step 1 On the expanded PTZ control panel, click to start moving in horizontal direction.
Step 2 Click again to stop moving.
5.6.7.4.6 Auxiliary Button
On the expanded PTZ control panel, click .
In the
Shortcut Aux
list, select the option that corresponds to the applied protocol.
In the
Aux No.
box, enter the number that corresponds to the AUX switch on the decoder.
Figure 5-47 Auxiliary

Dahua NVR5432-XI Specifications

General

Brand	Dahua
Model	NVR5432-XI
Category	Network Hardware
Language	English