Dahua NVR5432-XI User Manual

User's Manual
300
1) Click
Add
.
2) Configure parameters.
Table 5-51 Main-sub tracking parameters
Parameter Description
Type
Select a type according to the number of fisheye and PTZ cameras:
●
1 Fisheye + 1 PTZ.
●
1 Fisheye + 2 PTZ.
●
1 Fisheye + 3 PTZ.
Scene Name Customize the scene name.
Main Camera
Select a fisheye camera.
a. Click
Select
in
Main Camera
line.
b. Select a fisheye camera.
c. Click
Apply
.
Sub Camera
Select speed domes as needed.
a. Click
Select
in
Sub Camera
line.
b. Select speed domes.
c. Click
Apply
.
Step 3 Click
Apply
.
The monitoring area is successfully added.
Step 4 Configure calibration points to set the binding relationship of fisheye camera and speed
dome.
Set a distant place as the first calibration point to improve accuracy.
1) Click or double-click the target scene.
2) Click the target place on the video of fisheye camera, or move to the target place.
The video at upper-left corner is the fisheye camera screen, and the video at upper-
right corner is the speed dome screen.
3) Adjust position through the icons below the speed dome screen to make the center of
speed dome identical to the of fisheye camera.
The on the speed dome screen is the center of speed dome.
Table 5-52 Icon description
Icon Description
, Zoom in and zoom out.
, Adjust resolution.
, Adjust height.

Dahua NVR5432-XI Specifications

General

Brand	Dahua
Model	NVR5432-XI
Category	Network Hardware
Language	English