Dell X1000 Series User Manual

Statistics and Diagnostics 139
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Statistics_and_Diagnostics.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
The following fields are displayed:
A NOTE: Figures can be displayed in either Tabular or Graphical format by clicking
the relevant button.
The number of received and transmitted packets in the following counters
is displayed:
–
Join Empty Received — The number of received GVRP Join Empty
packets.
–
Join Empty Transmitted — The number of transmitted GVRP Join
Empty packets.
–
Empty Received — The number of received GVRP empty packets.
–
Empty Transmitted — The number of transmitted GVRP empty
packets.
–
Leave Empty Received — The number of received GVRP Leave
Empty packets.
–
Leave Empty Transmitted — The number of transmitted GVRP
Leave Empty packets.
–
Join In Received — The number of received GVRP Join In packets.
–
Join In Transmitted — The number of transmitted GVRP Join In
packets.
–
Leave In Received — The number of received GVRP Leave In
packets.
–
Leave In Transmitted — The number of transmitted GVRP Leave In
packets.
–
Leave All — The number of GVRP Leave All packets.
4 Select one of the Refresh Rate options to specify how frequently the
statistics should be refreshed.
Utilization Summary
Use the CPU Utilization page to display the system’s CPU utilization and
percentage of CPU resources consumed by the device.
To display CPU utilization in chart format:

Dell X1000 Series Specifications

General

PoE	No
Management	Unmanaged
Switching Capacity	16 Gbps (8-Port), 32 Gbps (16-Port)
Forwarding Rate	11.9 Mpps (8-Port), 23.8 Mpps (16-Port)
Jumbo Frame Support	9KB
Type	Unmanaged
Ports	8
Mounting	Desktop
MAC Address Table Size	8K
Power Consumption	8.5W (16-Port)
Series	X1000 Series

Summary

Features

Quality of Service Features

Details features for optimizing network performance through traffic classification and prioritization.

Security Features

Explains various security mechanisms like Dot1x, Port Security, and ACLs for network protection.

Hardware Description

Device Models

Details the different switch models available in the X1000 and X4000 series.

Power Supplies

Provides information on the universal input power supply and its specifications.

Switch Management

IPv4 Addressing

Covers the configuration of IPv4 addresses for interfaces, including static and DHCP assignments.

IPv6 Addressing

Details the configuration of IPv6 addresses, global parameters, and interface settings.

File Update and Backup

Describes managing device firmware and configuration files, including updates and backups.

Management Security

Explains how to configure security settings like password management and access control.

Statistics and Diagnostics

Statistics

Provides information on displaying device utilization statistics like packet counts and errors.

Diagnostics

Explains how to perform hardware tests, including integrated cable tests and optical transceiver diagnostics.

Network Administration: VLAN

Standard VLAN

Describes the configuration of standard (non-voice) VLANs, including membership and port settings.

Voice VLAN

Details how to configure Voice VLANs for IP voice traffic with QoS profiles.

Network Administration: Spanning Tree and LAG

Spanning Tree

Describes how to configure Spanning Tree Protocol (STP) versions like Classic, Rapid, and MSTP.

Link Aggregation (LAG)

Details the configuration of Link Aggregation Groups (LAGs) for increased bandwidth and redundancy.

Network Administration: Route Settings

System Routing Mode

IPv4 Route Settings

IPv6 Route Settings

Network Administration: Quality of Service

Global Settings

QoS Mapping

Network Administration: Security

Dot1x Authentications

Port Security

Network Administration: SNMP Monitoring

SNMP Global Parameters

User Security Model

Network Administration: Multicast

Global Parameters

IGMP Snooping

MLD Snooping

Network Administration: DHCP Snooping and DHCP Relay

DHCP Snooping

DHCP Relay

Network Administration: DHCP Server

DHCP Server Properties

Network Pool

Network Administration: Power Management

Green Ethernet

Power Over Ethernet (PoE)

Describes how to configure Power Over Ethernet (PoE) parameters and interface settings.

Using the CLI

Privileged EXEC Mode

Global Configuration Mode

Interface Configuration Mode