Dell X1000 Series User Manual

CLI 371
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Example 2 — The following example reloads the operating system in 10
minutes.
console# reload in 10
This command will reset the whole system and disconnect your
current session. Reload is scheduled for 11:57:08 UTC Fri
Apr 21 2012 (in 10 minutes). Do you want to continue? (y/n)
[Y]
Example 3 — The following example reloads the operating system at 13:00.
console# reload at 13:00
This command will reset the whole system and disconnect your
current session. Reload is scheduled for 13:00:00 UTC Fri
Apr 21 2012 (in 1 hour and 3 minutes). Do you want to
continue? (y/n) [Y]
Example 4 — The following example cancels a reload.
console# reload cancel
Reload cancelled.
show bootvar
Use the show bootvar EXEC mode command to display the active system
image file that was loaded by the device at startup, and to display the system
image file that will be loaded after rebooting the switch.
Syntax
show bootvar
show bootvar [unit unit-id]
Parameters
This command has no arguments or keywords.

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English