Dell X1000 Series User Manual

152 Network Administration: VLAN
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Defining Protocol Groups
Define a protocol group by performing the following steps:
1
Define a protocol group by assigning one or more protocols to the group
and giving it a protocol-group ID (any integer), using the Protocol Group
page.
2 Associate the group with a desired VLAN classification, per port, using the
Protocol Port page.
To define a protocol group:
1
Click Network Administration > VLAN > Standard VLAN > Protocol
Group
.
The currently-defined protocol groups are displayed.
2 Click Edit, Add and enter the fields:
–
Frame Type — Select a frame type to be accepted in the protocol
group.
–
Protocol Value — Select a protocol name.
or
–
Ethernet-Based Protocol Value (0600 - FFFF) — Enter the Ethernet
protocol group type.
–
Protocol Group ID — Assign a protocol group ID number.
Protocol Port
A protocol port is a port assigned to a particular protocol group. Traffic from
particular types of frames can be assigned to a protocol group, which has a
port and VLAN associated with it. The VLAN must be created before the
protocol group can be created.
To add an interface to a protocol group:
1
Click Network Administration > VLAN > Standard VLAN > Protocol
Port
.
A list of previously-defined protocol groups is displayed.
2 Click Edit, Add , and enter the fields:
–
Interface Type — Select either Port or LAG .
–
Interface — Select the interface to be added to a protocol group.

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English