Dell X1000 Series User Manual

378 CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
console# show interfaces status
Flow Link Back Mdix
Port Type Duplex Speed Neg ctrl State Pressure Mode
------ --------- ------ ----- -------- ---- ------ -------- --
te0/1 1G-Copper Full 1000 Disabled Off Up Disabled Off
te0/2 1G-Copper -- -- -- -- Down -- --
Flow Link
PO Type Duplex Speed Neg control State
----- ------- ------ ----- ------- ---- ------
Po1 1G Full 10000 Disabled Off Up
show ip dhcp tftp-server
Use the show ip dhcp tftp-server EXEC mode command to display
information about the backup server.
Syntax
show ip dhcp tftp-server
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
User Guidelines
The backup server can be a TFTP server.
Example
show ip dhcp tftp-server
tftp server address

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English