Dell X1000 Series User Manual

362 CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Example
The following example enables configuring the device to be an SSH server.
console(config)# ip ssh server
lldp transmit
Use the lldp transmit Interface (Ethernet) Configuration mode command to
enable transmitting LLDP on an interface. Use the no form of this command to
stop transmitting LLDP on an interface.
Syntax
lldp transmit
no lldp transmit
Parameters
N/A
Default Configuration
Enabled
Command Mode
Interface (Ethernet) Configuration mode
console(config-if)#
User Guidelines
LLDP manages LAG ports individually. LLDP sends separate advertisements
on each port in a LAG.
LLDP operation on a port is not dependent on the STP state of a port. I.e. LLDP
frames are sent on blocked ports.
If a port is controlled by 802.1x, LLDP operates only if the port is authorized.
Example
console(config)# interface te0/1

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English