Dell X1000 Series User Manual

Getting Help 395
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_GettingHelp.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
24
Getting Help
Contacting Dell
NOTE: Dell provides several online and telephone-based support and service
options. If you do not have an active Internet connection, you can find contact
information on your purchase invoice, packing slip, bill, or Dell product catalog.
Availability varies by country and product, and some services may not be available
in your area.
To contact Dell for sales, technical support, or customer-service issues:
1
Go to dell.com/support .
2 For customized support:
a Enter your system service tag in the Enter your Service Tag field.
b Click Submit .
The support page that lists the various support categories is displayed.
3 For general support:
a Select your product category.
b Select your product segment.
c Select your product.
The support page that lists the various support categories is displayed.
Locating Your System Service Tag
Your system is identified by a unique Express Service Code and Service Tag
number. The Express Service Code and Service Tag are found on the front of
the system by pulling out the information tag. Alternatively, the information
may be on a sticker on the chassis of the system. This information is used by
Dell to route support calls to the appropriate personnel.

Dell X1000 Series Specifications

General

PoE	No
Management	Unmanaged
Switching Capacity	16 Gbps (8-Port), 32 Gbps (16-Port)
Forwarding Rate	11.9 Mpps (8-Port), 23.8 Mpps (16-Port)
Jumbo Frame Support	9KB
Type	Unmanaged
Ports	8
Mounting	Desktop
MAC Address Table Size	8K
Power Consumption	8.5W (16-Port)
Series	X1000 Series

Summary

Features

Quality of Service Features

Details features for optimizing network performance through traffic classification and prioritization.

Security Features

Explains various security mechanisms like Dot1x, Port Security, and ACLs for network protection.

Hardware Description

Device Models

Details the different switch models available in the X1000 and X4000 series.

Power Supplies

Provides information on the universal input power supply and its specifications.

Switch Management

IPv4 Addressing

Covers the configuration of IPv4 addresses for interfaces, including static and DHCP assignments.

IPv6 Addressing

Details the configuration of IPv6 addresses, global parameters, and interface settings.

File Update and Backup

Describes managing device firmware and configuration files, including updates and backups.

Management Security

Explains how to configure security settings like password management and access control.

Statistics and Diagnostics

Statistics

Provides information on displaying device utilization statistics like packet counts and errors.

Diagnostics

Explains how to perform hardware tests, including integrated cable tests and optical transceiver diagnostics.

Network Administration: VLAN

Standard VLAN

Describes the configuration of standard (non-voice) VLANs, including membership and port settings.

Voice VLAN

Details how to configure Voice VLANs for IP voice traffic with QoS profiles.

Network Administration: Spanning Tree and LAG

Spanning Tree

Describes how to configure Spanning Tree Protocol (STP) versions like Classic, Rapid, and MSTP.

Link Aggregation (LAG)

Details the configuration of Link Aggregation Groups (LAGs) for increased bandwidth and redundancy.

Network Administration: Route Settings

System Routing Mode

IPv4 Route Settings

IPv6 Route Settings

Network Administration: Quality of Service

Global Settings

QoS Mapping

Network Administration: Security

Dot1x Authentications

Port Security

Network Administration: SNMP Monitoring

SNMP Global Parameters

User Security Model

Network Administration: Multicast

Global Parameters

IGMP Snooping

MLD Snooping

Network Administration: DHCP Snooping and DHCP Relay

DHCP Snooping

DHCP Relay

Network Administration: DHCP Server

DHCP Server Properties

Network Pool

Network Administration: Power Management

Green Ethernet

Power Over Ethernet (PoE)

Describes how to configure Power Over Ethernet (PoE) parameters and interface settings.

Using the CLI

Privileged EXEC Mode

Global Configuration Mode

Interface Configuration Mode