372 CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Command Mode
User EXEC mode
Example
The following example displays the active system image file that was loaded by
the device at startup and the system image file that will be loaded after rebooting
the switch:
console#
show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 1.1.0.73 19-Jun-2011 18:10:49 Not active*
2 image-2 1.1.0.73 19-Jun-2011 18:10:49 Active
"*" designates that the image was selected for the next boot
show crypto certificate
The show crypto certificate Privileged EXEC mode command displays the
device SSL certificates and key-pair for both default and user defined keys.
Syntax
show crypto certificate [mycertificate] [number]
Parameters
•
number
—Specifies the certificate number. (Range: 1,
2)
Default Configuration
Certificate number 1.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
Need help?
General