Dell X1000 Series User Manual

CLI 363
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
console(config-if)# lldp transmit
lldp receive
Use the lldp receive Interface (Ethernet) Configuration mode command to
enable receiving LLDP on an interface. Use the no form of this command to
stop receiving LLDP on an Interface (Ethernet) Configuration mode interface.
Syntax
lldp receive
no lldp receive
Parameters
N/A
Default Configuration
Enabled
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
LLDP manages LAG ports individually. LLDP data received through LAG ports
is stored individually per port.
LLDP operation on a port is not dependent on the STP state of a port. I.e. LLDP
frames are received on blocked ports.
If a port is controlled by 802.1x, LLDP operates only if the port is authorized.
Example
console(config)# interface te0/1
console(config-if)# lldp receive

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English