Dell X1000 Series User Manual

CLI 359
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
no ip default-gateway [ip-address]
Parameters
• ip-address —Specifies the default gateway IP address.
Command Mode
Global Configuration mode
Default Configuration
No default gateway is defined.
User Guidelines
Use the ip default-gateway command to defines a default gateway (default
route).
Use the no ip default-gateway ip-address command to delete one default
gateway.
Use the no ip default-gateway command to delete all default gateways.
Example
The following example defines default gateway 192.168.1.1.
console(config)# ip default-gateway 192.168.1.1
ip https certificate
Use the ip https certificate Global Configuration mode command to configure
the active certificate for HTTPS. Use the no form of this command to restore the
default configuration.
Syntax
ip https certificate number
no ip https certificate
Parameters
number—Specifies the certificate number. (Range: 1–2)

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English