Dell X1000 Series User Manual

316 Network Administration: DHCP Server
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_DHCP_Server.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
• Static —The hardware address of the host was mapped to an IP
address.
•
Dynamic —The IP address, obtained dynamically from the
device, is owned by the client for a specified period of time. The
IP address is revoked at the end of this period, at which time the
client must request another IP address.
2 Click Delete . The Running Configuration file is updated.
Excluded Addresses
By default, the DHCP server assumes that all pool addresses in a pool may be
assigned to clients. A single IP address or a range of IP addresses can be
excluded. The excluded addresses are excluded from all DHCP pools.
To define an excluded address range:
•Click Network Administration > DHCP Server > Excluded Addresses .
The previously-defined excluded IP addresses are displayed.
To add a range of IP addresses to be excluded, click Add, and enter the fields:
– Start IP Address —First IP address in the range of excluded IP
addresses.
–
End IP Address —Last IP address in the range of excluded IP
addresses.

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English