Dell X1000 Series User Manual

284 Network Administration: SNMP Monitoring
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
• SHA Key — Users are authenticated using the HMAC-SHA-96
authentication level.
–
Authentication Password — If the MD5 Key or SHA Key
authentication method was selected, enter the user-defined password
for a group.
–
Privacy Method — If the MD5 Key or SHA Key authentication
method was selected, enable the DES privacy method or None.
–
Privacy Password — If the DES privacy method is selected, enter the
user-defined password.
Communities
When using SNMP v1,2, communities strings (passwords) are used to provide
access rights in the following ways:
• Basic Table — The access rights of a community can be read-only, read-
write, or SNMP Admin. In addition, you can restrict access to the
community to only certain MIB objects using a
view . Views are defined in
the
Views Setting pages.
•
Advanced Table — Access rights to a community are assigned to a group
that consists of users. A group can have Read, Write, and Notify access to
views. Groups are defined in the
Access Control pages.
To define an SNMP community:
1
Click Switch Management > SNMP Monitoring > Communities .
The Basic and Advanced tables are displayed.
2 To add a new community, click Edit, Add .
3 Define the SNMP management station by entering its IP address
information:
–
Supported IP Format — Select whether the IPv4 or IPv6 format is
being used.
–
IPv6 Address Type — When the community supports IPv6, this
specifies the type of static address supported. The possible options are:
•
Link Local — A Link Local address that is non-routable and used
for communication on the same network only.

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English