CLI 381
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
console#
show ip interface vlan 1
!source_precedence_is_supported &&
!broadcast_address_configuration_is_supported &&
!ip_redirects_is_supported
IP Address I/F I/F Status Type Directed Status
admin/oper Broadcast
------------- ------ ----------- ------- -------- -----
10.5.230.232/24 vlan 1 UP/UP Static disable Valid
show power inline
Use the show power inline Privileged EXEC mode command to display
information about the inline power for all interfaces or for a specific interface.
This command is only supported on devices that support PoE.
Syntax
show power inline [interface-id | module stack-member-number]
Parameters
•
interface-id
—Specifies an interface ID. The interface ID must be an
Ethernet port.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
Example
The following example displays information about the inline power for a
specific port.
console(config)# show power inline gi1/1/1
Port Powered Device State Status Priority Class
----- -------------- ------- ------ -------- -------
To Next Page
Loading...
Need help?
General