Dell X1000 Series User Manual

360 CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Default Configuration
The default certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
First, use crypto certificate generate to generate one or two HTTPS certificates.
Then use this command to specify which is the active certificate.
Example
The following example configures the active certificate for HTTPS.
console(config)# ip https certificate 2
ip routing
To enable IP routing, use the ip routing command in global configuration mode.
To disable IP routing, use the no form of this command.
Syntax
ip routing
no ip routing
Parameters
This command has no arguments or keywords.
Default Configuration
IP routing is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the command to enable IP Routing.
The switch supports one IPv4 stack on in-band interfaces and the OOB port.

Dell X1000 Series Specifications

General

Brand	Dell
Model	X1000 Series
Category	Switch
Language	English