Enterasys D-Series User Manual

clear lacp
6-42 Port Configuration
Usage
LACPwillusethisvaluetoformanoperkey.Onlyunderlyingphysicalportswithoperkeys
matchingthoseoftheiraggregatorswillbeallowedtoaggregate.Thedefaultadminkeyvaluefor
allLAGportsis32768.
Example
ThisexampleshowshowtosettheLACPadminkeyto2000forLAGport6:
D2(su)->set lacp aadminkey lag.0.6 2000
clear lacp
UsethiscommandtoclearLACPsystempriorityoradminkeysettings.
Syntax
clear lacp {[asyspri] [aadminkey port-string]}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocleartheactor adminkeyforLAGport6:
D2(su)->clear lacp aadminkey lag.0.6
set lacp static
Usethiscommandtodisableorenablestaticlinkaggregation,ortoassignoneormoreunderlying
physicalportstoaLinkAggregationGroup(LAG).
Syntax
set lacp static {disable | enable} | lagportstring [key] port-string
Parameters
asyspri Clearssystem priority.
aadminkeyport‐string Resetsadminkeysforoneormoreportstothedefaultvalueof32768.
disable|enable Disablesorenablesstaticlinkaggregation.
lagportstring SpecifiestheLAGaggregatorporttowhichnewportswillbeassigned.

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English