Enterasys D-Series User Manual

show spantree bpdu-forwarding
Enterasys D-Series CLI Reference 8-9
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresettheSpanningTreeversion:
D2(su)->clear spantree version
show spantree bpdu-forwarding
Use this command to display the Spanning Tree BPDU forwarding mode.
Syntax
show spantree bpdu-forwarding
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytheSpanningTreeBPDUforwardingmode:
D2(su)->show spantree bpdu-forwarding
BPDU forwarding is disabled.
set spantree bpdu-forwarding
UsethiscommandtoenableordisableSpanningTreeBPDUforwarding.BydefaultBPDU
forwardingisdisabled.
Syntax
set spantree bpdu-forwarding {disable | enable}
Parameters
disable|enable DisablesorenablesBPDUforwarding;.

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English