Enterasys D-Series User Manual

show system login
Enterasys D-Series CLI Reference 2-3
show system login
Usethiscommandtodisplayuserloginaccountinformation.
Syntax
show system login
Parameters
None.
Defaults
None.
Mode
Switchcommand,superuser.
Example
Thisexampleshowshowtodisplayloginaccountinformation.Inthiscase,switchdefaultshave
notbeenchanged:
D2(su)->show system login
Password history size: 0
Password aging : disabled
Username Access State
admin super-user enabled
ro read-only enabled
rw read-write enabled
Table 2‐1providesanexplanationofthecommandoutput.
Table 2-1 show system login Output Details
Output Field What It Displays...
Password history size Number of previously used user login passwords that will be checked for
duplication when the set password command is executed. Configured with set
system password history (page 2-7).
Password aging Number of days user passwords will remain valid before aging out. Configured
with set system password aging (page 2-6).
Username Login user names.
Access Access assigned to this user account: super-user, read-write or read-only.
State Whether this user account is enabled or disabled.

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English