Enterasys D-Series User Manual

show spantree stats
Enterasys D-Series CLI Reference 8-5
show spantree stats
UsethiscommandtodisplaySpanningTreeinformationforoneormoreports.
Syntax
show spantree stats [port port-string] [sid sid] [active]
Parameters
Defaults
Ifport‐stringisnotspecified,SpanningTreeinformationforallportswillbedisplayed.
Ifsidisnotspecified,informationforSpanningTree0willbedisplayed.
Ifactiveisnotspecifiedinformationforallportswillbedisplayedregardlessofwhetherornot
theyhavereceivedBPDUs.
Mode
Switchcommand,read‐only.
set spantree protomigration 8-24
show spantree spanguard 8-25
set spantree spanguard 8-25
clear spantree spanguard 8-26
show spantree spanguardtimeout 8-27
set spantree spanguardtimeout 8-27
clear spantree spanguardtimeout 8-28
show spantree spanguardlock 8-28
clear/set spantree spanguardlock 8-29
show spantree spanguardtrapenable 8-29
set spanstree spanguardtrapenable 8-30
clear spanstree spanguardtrapenable 8-30
show spantree legacypathcost 8-31
set spantree legacypathcost 8-31
clear spantree legacypathcost 8-32
For information about... Refer to page...
portport‐string (Optional)Displaysinformationforthespecifiedport(s).Foradetailed
descriptionofpossibleport‐‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 6‐1.
sidsid (Optional)DisplaysinformationforaspecificSpanningTreeidentifier.If
notspecified,SID0isassumed.
active (Optional)Displaysinformation
forportsthathavereceivedSTPBPDUs
sinceboot.

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English