Chapter 2: Important information
2-2 Fresenius Medical Care 4008 S (Version V10) SM-EN 7/01.13
2.3 Significance of the note
2.4 Precautions for working on the device
Requirements Knowledge of the current Operating Instructions of the respective
device. Background experience in mechanics, electrical and medical
engineering.
Authorized persons
Test equipment and
accessories
The activities described in the document require the availability of the
necessary technical measuring equipment and accessories.
Specifications The technical specifications must be adhered to.
Precautions Before turning power on, repair any visible damage.
Prior to opening the device and when working on the open device, the
following precautions have to be observed:
– Protect the components against ingress of liquids.
– Do not touch live parts.
– Disconnect and connect all jacks, connectors and components only
when the device is turned off.
ESD precautions When repairing the device and when replacing spare parts, observe the
applicable ESD precautions.
To be observed after
working on the device
A T1 test and a check of the electrical safety must be performed after
working on the device.
The current Operating Instructions must be enclosed with the device. If
necessary, additional operator training is required.
Note
Advises the operator that failure to observe this information can:
– cause damage to the equipment.
– result in a specific function not being executed at all or not being
executed correctly.
Warning
Commissioning steps, extensions, adjustments, calibrations,
maintenance measures, modifications or repairs may only be carried
out by the manufacturer or persons authorized by him.
To Next Page
Loading...
Need help?
General
