Fresenius Medical Care 4008 S Service Manual

Chapter 9: Calibration / adjustment
Fresenius Medical Care 4008 S (Version V10) SM-EN 7/01.13 9-1
9 Calibration / adjustment
9.1 CALIBRATION
The CALIBRATION service menu can only be called in service mode.
9.1.1 Settings without menu display
Note
If detected before starting calibration on the hydraulics unit, potential
deposits must be removed by running an appropriate disinfection
program.
Settings without menu display Description
Setting the blood pump stop alarm (see chapter 9.1.5 page 9-6)
Calibrating the Single-Needle blood pump
(Single-Needle pressure) (optional)
(see chapter 9.1.11 page 9-11)
Adjusting the current increasing pulse (see chapter 9.1.15 page 9-14)
Setting the Hall sensors in the heparin pump (see chapter 9.1.46 page 9-39)




CALIBRATION
DIAGNOSTICS
MISCELLANEOUS
SETUP MENU
Conf
key

Fresenius Medical Care 4008 S Specifications

General

Brand	Fresenius Medical Care
Model	4008 S
Category	Medical Equipment
Language	English