4 Fax
124
Fax
4
Important • One touch buttons have sensors. The sensors recognize the address numbers from 001 to
030, 031 to 060, and 061 to 070. Press a one touch button after turning over the one-touch
panel and removing your hand from the panel. Do not touch a one touch button while you
are turning over the panel.
• Do not put a seal (such as recipient seal) to one touch button panels or one touch button.
• Take care not to place an object or spill liquid on or near the one touch buttons.
1 Press a one touch button. Confirm
that the recipient (fax number)
specified with the one touch button
is displayed on the touch screen.
Note • One touch buttons correspond
to the numbers registered for
the address numbers from
001 to 070.
• Repeat this step to specify
multiple recipients.
• Turn the one touch button
panels over to press the one
touch buttons for address
numbers 031 and above.
Specifying a Destination using the Keyboard Screen
When the Additional G3 Port (optional) is installed, you can set the line (port) and send
faxes. Local terminal information can be registered to each line. You can use a line for
your purpose.
For information on local terminal information, refer to "Local Terminal Information" (P.320).
1 Select [Keyboard].
2 Enter "<", "port number", ">", and
recipient’s "telephone number" with
the keyboard that appears on the
touch screen.
3 Press the <Start> button.
Note • The port numbers are "1", line 2 (LINE 2 jack) J "2" and line 4 (LINE 4 jack) J "4".
• You can specify line 2 and line 4 when an option is installed.
Entering Specific Symbols
When specifying a recipient, you can use the following features to enter specific
symbols from the touch screen.
Feature Button Function Input method
Enter pause - or
<Pause> (-)
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. by additional button
presses.
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
001 002 003
004 005 006
007 008 009
010 011 012
013 014 015
016 017 018
019 020 021
022 023 024
025 026 027
028 029 030