General Settings
127
Fax
4
îš„2 Sided - Skip Blank
Select to transmit only documents whose surface is not blank. You can send
documents without concerning for which side is the front.
Note • When [2 Sided - Skip Blank] is selected, the settings change as follows:
- [Original Type]: [Text]
- [Lighten / Darken]: [Normal]
- [Reduce/Enlarge]: [100%]
• You can switch [Skip Blank Pages] by pressing the <Power Saver> button while fax features
are being set.
• [2 Sided - Skip Blank] appears when [Skip Blank Pages] is set to [Enabled]. For more
information, refer to "Skip Blank Pages" (P.316).
îš„More...
The [2 Sided Originals] screen is displayed.
Refer to "[2 Sided Originals] Screen" (P.127).
[2 Sided Originals] Screen
1 Select which side of the documents
is sent and the document type.
îš„1 Sided
Select to transmit 1-sided documents.
îš„2 Sided
Select to use the 2-sided feature to transmit all pages.
îš„2 Sided (First Page 1 Sided)
Select when the front side of the first page and both sides of the remaining pages are
sent. Use this item when the second side of the first page is blank.
îš„2 Sided (Skip Blank Pages)
Select to transmit only documents whose surface is not blank. You can send
documents without concerning for which side is the front.
îš„Originals
[Head to Head] is selected when the first and second sides of a 2-sided document are
of the same orientation. [Head to Toe] is selected when the first and second sides of a
2-sided document are of the opposite orientation.
Original Type (Selecting the Image Quality Type for the Document)
Specify the image quality in accordance with whether the document contains text,
photos, etc.
1 Select the original type.
To Next Page
Loading...
Need help?
General
