10 System Settings
258
System Settings
10
System Settings Procedure
To make or change the system settings, it is necessary to enter the System
Administration mode.
This section describes the basic procedures for system settings. The following shows
the reference section for each procedure.
Step 1 Entering System Administration Mode .........................................................................258
Step 2 Entering the System Administrator User ID and Password...........................................258
Step 3 Selecting the Operation Mode from the System Administrator Menu ..........................259
Step 4 Selecting an Item on the [System Settings] Screen .......................................................259
Step 5 Setting a Feature ............................................................................................................260
Step 6 Exiting the System Administration Mode......................................................................260
Step 1 Entering System Administration Mode
1
Press the <Log In/Out> button.
Step 2 Entering the System Administrator User ID and Password
To enter System Administration mode, enter the system administrator User ID. If
[Passcode Entry from Control Panel] in [Login Setup / Auditron Administration] is
activated, the password needs to be entered.
It is recommended to change the system administrator user ID and password immediately after installing
the machine. For more information, refer to System Administrator Settings (P.342).
1 Enter the user ID with the numeric
keypad or a keyboard displayed by
pressing [Keyboard], and select
[Confirm].
Note • The default user ID is "11111".
When using the
Authentication feature, a
passcode is required. The
default passcode is "x-admin".
• The machine displays the following message if the system administration login failed:
"Login failed. Re-enter User Details and select Confirm."
• The machine displays the following message if the authentication failed more than the
specified number of times:
"You have made the maximum number of attempts to access the system. Access denied."
123
456
789
0 #
C
<Log In/Out>
button
To Next Page
Loading...
Need help?
General
