14 Maintenance
424
Maintenance
14
4 Insert the empty punch scrap
container into its original position
until it comes to a stop.
5 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
Replacing the Stamp Cartridge
If your machine offers fax service, and if the optional stamp kit is installed, replace the
stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables other than what is recommended by us are not
covered by the maintenance service contract.
• Before using consumables, carefully read the instructions and precautions on the
packaging.
Note • We recommend having spare consumables ready.
• To order consumables, contact our Customer Support Center.
(Product name: Stamp Replace Kit / Product code: F451)
1 Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
2 Pull up the green lever to open the
inner cover.
To Next Page
Loading...
Need help?
General
