16 Appendix
552
Appendix
16
Specifications
This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
îš„Copy Feature Specifications
Type Console
Color support Full Color
Scan Resolution 600×600 dpi (23.6×23.6 dots/mm)
Output resolution 600×600 dpi (23.6×23.6 dots/mm)
Color gradation 256 color gradation for each color (16,700,000 colors).
Warm-up time 45 seconds or less (at 20 °C room temperature)
Important • The warm-up time may be 45 seconds or more when an
optional fax kit is installed or depending on the network
environment.
Copy document The maximum size is 297×432 mm (A3, 11×17") for both sheets
and books.
Copy (sheet) size [Trays 1 - 4]
Maximum: A3 (297×420 mm), 11×17"(279×432mm)
Minimum : A5 (148×210 mm)
[Bypass tray]
Maximum: 12.6×17.7" (320×449.6 mm), 12×18"
(304.8×457.2mm)
Minimum : postcards (100×148 mm), envelopes (Choukei 3)
(120×235 mm)
Non-standard size: X direction 100 to 483 mm, Y direction 100
to 305 mm
(When copying both sides on non-standard size paper, specify
the size within the range from 140 to 432 mm for the X direction
and from 140 to 297 mm for the Y direction.
Image loss width: First 4 mm or less, last 2 mm or less,
and top/front 2 mm or less.
Important • If the X (width) of non-standard size paper is less than 140
mm, documents may not be printed properly.
Copy paper Paper Trays 1 - 4 : 64 -169g/m
2
Paper Tray 5 (Bypass): 55-220g/m
2
Important • The use of paper recommended by Fuji Xerox is suggested.
Copying may not be performed correctly depending on the
conditions.
To Next Page
Loading...
Need help?
General
