Fuji Xerox ApeosPort-II C4300 User Manual

3 Copy
54
Copy
3
Changing the Number of Copies
You can change the number of copies that is set initially during scanning or copying the
document.
1 Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
2 Select [Change Quantity...].
3 Set the number of copies with the numeric keypad. The new quantity must include the
number of copies that have already been printed. When reducing the quantity, you
cannot enter a number less than the number of copies that have already been printed.
4 Press the <Start> button.
Interrupting the Copy Job
You can temporarily suspend the current continuous copy job to give another job higher
priority.
1 Press the <Interrupt> button.
Note • The interrupt indicator lights
up to indicate that the
machine is in the job interrupt
mode.
2 Load the interrupt document and set features if necessary.
3 Set the number of copies with the numeric keypad.
4 Press the <Start> button.
123
456
789
0 #
C
<Stop> button
123
456
789
0 #
C
<Interrupt>
button

Fuji Xerox ApeosPort-II C4300 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-II C4300
Category	Printer
Language	English