Fujitsu Primergy RX100 S3 User Manual

181
PRIMERGY RX100 S3 User’s Guide
Installing Internal Options
7
7.3 Installing Memory Modules
Additional memory will help to increase the amount of data to read at a time and
improve the server processing capability.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so may cause
electric shock ("1.4.3 Turning Off the Server" (pg.33)).
• Do not install unauthorized third party memory modules. Doing so may cause
electric shock, a fire, or failures.
• Wait for a sufficient period of time after server shutdown before installing or
removing memory. Failure to do so may cause burns.
• When installing or removing memory modules, make sure to remove the
screws on the specified points only. Failure to do so may cause injury.
Also, it may cause failures.
• Touch only the specified part of the printed circuit board.
Failure to do so may cause injury. Also, it may cause failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not insert or remove memory modules repeatedly. This could damage the
server.
• Hold the edge of the memory module as shown below. Do not touch the parts
containing gold wire (terminal).
Do not touch this part
Memory module

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English