Fujitsu Primergy RX100 S3 User Manual

221
PRIMERGY RX100 S3 User’s Guide
8
Configuring Hardware and Utilities
8.1.13 Exit Menu
This menu exits the BIOS Setup Utility.
Select the option for handling BIOS settings when exiting the utility.
table: Items on the Exit Menu
Item Description
Save Changes & Exit Save the current settings and exit the BIOS Setup Utility. After it exits the
server reboots.
Discard Changes & Exit Exits the BIOS Setup Utility without saving current settings. Previously
saved settings remain valid.
Get Default Values Returns to the server's default values for all items. However, since some
items differ from the initial values which are the settings at the time of
purchase, after returning to default settings, it is necessary to change to the
initial values.
Load Previous Values Sets all items to the values before the last changes by reading from CMOS.
Current setting values are discarded.
Item Specific Help
Select Item
Select Menu
Change Values-/+
Enter
F1
Esc
Help
Exit
F9
F7
Setup Defaults
Previous Values
Advanced Security Server ExitMain
Exit System Setup and
save your changes to
CMOS.
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
Execute Command

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English