Fujitsu Primergy RX100 S3 User Manual

226
Chapter 8 Configuring Hardware and Utilities
8.2.4 Global Properties
A list of Boot Adapters is displayed. Press the [F2] key from the [Main] menu window, select [Global
Properties] and press the [Enter] key to display the window.
table: Items on the Global Properties Window
Item Setting Description
Pause When Boot Alert
Displayed
Yes (Unchangeable) Sets whether or not the SCSI device scan at startup
stops when an error is detected.
Boot Information Display
Mode
Verbose (Unchangeable) Sets whether or not to abridge the SCSI device
information displayed on the startup screen.
Negotiate with devices Supported (Unchangeable) Sets whether or not to set the transfer rate between
the SCSI card and SCSI devices.
Video Mode Color (Unchangeable) Sets the screen color scheme to color or
monochrome.
Support Interrupt Hook interrupt, the Default
(Unchangeable)
Sets whether or not to support interruption
channels.
Restore Defaults Reads default values for the controller.
LSI Logic MPT SCSI Setup Utility Version MPT BIOS-IME-x.xx.xx
Global Properties
Pause When Boot Alert Displayed
Boot Information Display Mode
Negotiate with devices
Video Mode
Support Interrupt
<Restore Defaults>
[Yes]
[Verbose]
[Supported]
[Color]
[Hook interrupt,the Default]
F1 =HELP
Esc=Abort/Exit
ArrowKeys=Select Item
Home/End=Select Item
-/+ =Change [Item]
Enter=Excute <Item>

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English