Fujitsu Primergy RX100 S3 User Manual

205
PRIMERGY RX100 S3 User’s Guide
8
Configuring Hardware and Utilities
8.1.2 Main Menu
The [Main] menu is initially displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured on the [Main] menu.
table: Items on the Main Menu
Item Setting Description
System Time Present time The system time is set in "hours:minutes:seconds"
format. The hours should be based on a 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
If a highly precise system time is necessary, install a
network synchronized time system (NTP, etc.).
Note:
 Repeat the procedure until the correct time is set.
If a highly precise system time is necessary, install
a network synchronized time system (NTP, etc.).
System Date Present date The system date is set in "month:day:year" format.
For example, September 20, 2005 is set as "09", "20",
"2005".
Standard IDE Sets the type and operating mode for connected IDE devices.
Press the [Enter] key to display the "8.1.3 Standard IDE Submenu" (pg.206)
window.
Boot Options Sets system startup options. Press the [Enter] key to display the "8.1.4 Boot
Options Submenu" (pg.207) window.
Base Memory A usable base memory size of less than 1MB appears.
Extended Memory A memory size of more than 1MB appears.
Item Specific Help
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F7
Setup Defaults
Previous Values
Advanced Security Server ExitMain
<Tab>, <Shift-Tab>, or
<Enter> selects field.
System Time:
System Date:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
[HH:MM:SS]
[MM/DD/YYYY]
[GCR-8483B-(PM)]
640K
***M

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English