192
Chapter 7 Installing Internal Options
7.5 Installing an Internal CD-ROM
Drive Unit
This section explains the procedure for installing a CD-ROM drive (optional).
Unless otherwise noted, description of the CD-ROM includes DVD-ROM.
7.5.1 Installable CD-ROM Drive Units
The following CD-ROM drive units can be installed on this server.
Package
Before installing the internal CD-ROM drive unit, refer to "Appendix B.2 Internal CD-ROM Drive Unit
Specifications" (pg.276) and, as for DVD-ROM drive unit, refer to "Appendix B.3 Internal DVD-ROM
Drive Unit Specifications" (pg.276) to check the contents of the package.
For internal DVD-ROM drive unit, refer to the manual supplied with the internal DVD-ROM drive unit to
check the contents of the package.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so may cause
electric shock ("1.4.3 Turning Off the Server" (pg.33)).
• When installing a CD-ROM drive, hold it by the side.
Applying force to the top may cause failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
table: Installable CD-ROM Drive Units
Product name Model Remarks
CD-ROM ATAPI PG-CD320B IDE (ATAPI)
DVD-ROM ATAPI PG-DVA102D IDE (ATAPI)
To Next Page
Loading...
Need help?
General